70 / 100

Nowadays many web researchers ask, How to Descale an Electric Kettle Step by Step?

The electric kettle is one of the most important kitchen appliances that we need in our daily life. This appliance is very convenient as well as easier to use. We use an electric kettle for tea making; such as boiling water. 

Also making instant recipes, soups, and so on. As the electric kettle has a pouring spot, this machine is far more convenient than using a microwave. But due to boiling water over and over inside of the kettle may get limestone buildup.

Thus, it gets scaling or kettle furring that slows down the heating of your electric kettle. Therefore, like other appliances, your kettle needs a bit of cleaning to keep the exterior and the interior in top shape.

If you’re searching over the internet how to descale electric kettle, then this article would be very helpful for you.

Because, in this article, we are going to show you how to descale your electric kettle and care for this small kitchen appliance to keep it good for working for a long time to come.

How often electric kettle should be cleaned up?

Many kettle users usually ask me how often an electric kettle should be cleaned up?

To be honest, there is no hard and fast rule, but it should depend upon how often you use your electric kettle machine.

The exterior part of this device should be wiped down for eliminating smudges and splatters once in a week for a minimum.

For example, if you use an electric water kettle just for boiling the water, then it should be descaled to the water minerals (hard) at least 4-5 times in a year.

Moreover, an electric kettle small appliance can be cleaned up once a month at least if it has a cartridge or water filter.

Tools/ Equipment:

  • Water
  • Microfiber cloth
  • Bottlebrush or a non-abrasive sponge
  • Lemon juice or citric acid powder
  • Distilled white vinegar
  • Dishwashing liquid

Descale your electric kettle step by step:

To descale your electric kettle properly, you can follow these steps below:

  • Descale the electric kettle with vinegar:

Take your kettle and fill it with almost one-half of its portion of water 1:1 solution of water. Hence, get the distilled white vinegar and make the water solution to a full boil.

After that, shut down your electric kettle if it doesn’t turn off automatically. Now let the distilled white vinegar solution stay in the kettle at least for 20 minutes. Finally, discard the kettle cleaning solution.

  • Descale your kettle with Lemon Juice:

Using lemon juice or citric acid powder to the descaling electric kettle is one of the most effective solutions. Substitute citric acid powder or the freshly-squeezed or take a bottled lemon juice for the distilled white vinegar.

Then mix up a solution with a 1:1 ratio of lemon juice and water or citric acid powder with 2 tablespoons in amount. Fill your kettle with water (half portion of the kettle). Afterward, you should bring the mixing solution for boiling.

Now turn on your electric kettle and keep this solution inside of the kettle for 20 minutes at least before discarding.

  • Disassemble the kettle:

Unplug the cooled kettle before cleaning up the electric kettle any further. If it is an electric water kettle, then remove it before you clean up the interior part of this gadget.

  • Replace the water filter:

If you’re using an electric water kettle machine, then it should have a water filtering cartridge or a water filter function. Using this function, you can easily remove as well as clean up your electric kettle properly following the manufacturer’s directions.

Most of the filters are made of metal and it can be cleaned up using soaking them in the solution. Just get the hot water inside of the kettle with distilled white vinegar and keep it for 5 minutes at least. After that, you should scrub the rinse with fresh water and scrub with the bottle brush.

  • Scrub the electric kettle inside:

As we told you before in the tools part that gets a soft-bristled bottle brush or a non-abrasive sponge so you can scrub the inside part of the electric kettle.

In this regard, you should pay particular attention specifically to the areas of the spout wherever the build-up minerals are heavy.

Dipping the non-abrasive sponge or the brush in pure vinegar would be helpful for you to dislodge the spout that builds up around these areas.

Just bear in mind you should never emerge your electric kettle in the water entirely. In doing so, the heating function can be destroyed or unable to work properly.

  • Descale the electric kettle’s exterior part:

Take a non-abrasive sponge and wipe down the exterior part of the electric kettle. Start dipping it in a solution of warm water. Get the dishwashing liquid and take a few drops of it so you can remove any kind of splatters or smudges.

If you notice there are heavy spots that are tough to remove, then you can dip the damp sponge using baking soda in some dry. Using the baking soda with gentle abrasive sponge nature can be very effective to remove the mess.

To keep your stainless steel exterior part of the electric kettle shiny and free from the streak, take a few drops of olive oil and start rubbing on the outside of the kettle.

Thus, you can keep your electric kettle looking shiny as well as impressive.

  • Final Rinses and Reassemble the Electric Kettle:

Fill up your electric kettle about half of the full portion of the kettle with water for a final rinse. You can do it while you see your electric kettle is clean, looks good, and reassembles any kind of component.

Now plug it in the electric circuit to bring the water in the kettle to a full boil. After that, you should just discard the water.

You can repeat the rinse cycle one more time. By doing so, you can make sure all of the cleaning solutions and minerals are gone from your using an electric kettle.

Additional Tips to Keep your Electric Kettle Clean for Longer:

  • While you descale your electric kettle, use the distilled water rather than using tap water. If you live in an area of hard water or depend on nature for water supply, then it is particularly very important for you.
  • You should never leave the water that stays in the electric kettle. Do not place your finger inside of the kettle while it’s a plugin and the water is boiling. Just learn how to heat the water properly that would be necessary for each of the uses. And keep the electric kettle empty as always after every use of it.

Final Recommendation:

Remember, a clean kettle is a green kettle. Because while you clean up your electric kettle, it will use less energy as well as extend the period of the life of your kettle.

Do not forget to share your experience in the comments section below on your electric kettle descaling.

If you found these guidelines above are helpful, then share it with your friends and family. Hope it will be helpful for them too.

We’ll bring more updates for you, so stay tuned.